MiLAN MIL-W2332G Guide de l'utilisateur télécharger pdf (Page 19)

2.4.3 Step 2: Configuring TCP/IP Settings

Fig. 6. TCP/IP settings.

Go to the TCP/IP, Addressing section to configure IP address settings. The IP address

can be manually set or automatically assigned by a DHCP server on the LAN. If you are

manually setting the IP address, Subnet mask, and Default gateway settings, set

them appropriately, so that they comply with your LAN environment. In addition, you can

specify the Host name and Domain (DNS suffix) of the AP.

When you are finished, click Save at the bottom of this page, and then you are brought

back to the start page.

2.4.4 Step 3: Configuring IEEE 802.11 Settings

Fig. 7. IEEE 802.11g communication settings.

Go to the IEEE 802.11, Communication section to configure IEEE 802.11g-related

communication settings, including Regulatory domain, Channel number, and Net-

work name (SSID).

The number of available RF channels depends on local regulations; therefore you have

to choose an appropriate regulatory domain to comply with local regulations. The SSID

of a wireless client computer and the SSID of the AP must be identical for them to

communicate with each other.

When you are finished, click Save at the bottom of this page, and then you are brought

back to the start page.

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 69 70

Pas de commentaire

MiLAN MIL-W2332G Guide de l'utilisateur Page 19